High Speed HDMI cable with data rates up to 10.2 Gbps
Built-in booster for signal amplification
High Definition 1080p 3D with 4K x 2K support
Support color depths to 48 bits
Up to 100 Mbps of bi-directional bandwidth is accessible over the HDMI Ethernet Channel
Passive design, no external power is required
Essential Info
This MONOcost High Speed HDMI cable with Ethernet is designed with a built-in booster for applications that require high-performance transmission of HDMI digital video and multi-channel audio signals. This cable has an active amplification built-in to prevent impedance mismatch, caused by the cable attenuation, dielectric losses and compensation for skin effect over long distances. For flawless transmission, the output of the cable is placed at the end of the display to amplify full signal transmission with zero signal loss. The built-in booster does not require an external power source since it is using the 5-volt from pin 18 on the HDMI cable extracting the power from the display. This cables is fully CL3 certified which surpasses any in-wall code requirement for residential or commercial installations.
What's Included
HDMI Cable each length type
Specifications
Specifications
Manufacturer
monocost
Manufacturer Product No.
HDMI015, HDMI020,HDMI030,HDMI040,HDMI050
UPC
PENDING
Standards
High speed HDMI cable with Ethernet
System Management Bus (SMBus)
Provides control of boost, output amplitude, enable, and clock channel signal detect threshold
Data Rates
Up to 10.2 Gbps
Color Depth Support
30 bit, 36 bit and 48 bits (16 bits per color)
Vertical Frequency
Supports 60Hz & 120Hz DC-Coupled inputs and outputs
Temperature
-40° C to 85° C operating range
Shielding
Triple-layer shielding for EMI/RFI rejection
Construction
26~28 AWG copper wire
Regulatory Compliance
RoHs compliant and CL3 rated
Important notes:
Smarthome does not accept any returns for this product. If defective, you will need to contact the manufacturer directly for all warranty issues.
상품 정보
